Standardized mechanical parts for fastening and connection. Standard fasteners mainly include bolts, studs, screws, set screws, nuts, washers and rivets
The flat washer is used as a part to prevent the bolt and nut from locking. Where fasteners are used, flat pads will be used. How to choose a suitable flat pad? Flat washer is a kind of flat washer, which is mainly used to increase and fasten the contact area between screws and some large equipment. When using flat washer, it is often suitable for nuts and nuts to cooperate with each other. When storing flat washer, it must have the necessary important characteristics within the most effective sealing time:
1. In the case of bad environment, the flat gasket should be sealed. When a certain temperature and pressure is working, it is not easy to leak.
2. When the flat gasket is connected with the contact surface, it is necessary to better ensure the tightness, just like the just good effect.
3. When the gasket receives pressure, under the influence of temperature, the anti wrinkle ability should be better, otherwise the screw will be damaged and hard gas leakage will occur.
4. Do not get infected when using flat pads.
5. The flat pad can be disassembled well, which is the greatest function of selecting the flat pad.
6. Remember to ensure that the flat pad can be used normally under relative temperature when using it.
