How to choose the flat washer
Time:2022/5/27 Browse:6197
The flat washer is used as a part to prevent the bolt and nut from locking. Where fasteners are used, flat mats will be used. How to choose the appropriate flat mats? The flat washer is a kind of flat washer, which is mainly used to enlarge and tighten the contact area between screws and some large equipment. When the flat washer is used, it is often suitable for nuts and nuts to cooperate with each other. When the flat washer is stored, it must be within the most effective sealing time. It has the necessary important characteristics:
1. The flat gasket should be sealed in a bad environment. It is not easy to leak when a certain temperature and pressure are in operation.
2. When the flat gasket is connected with the contact surface, it is necessary to better ensure the tightness, just like the just good effect.
3. When the gasket is under pressure, the anti wrinkle ability should be better under the influence of temperature, otherwise the screw will be damaged and hard gas leakage will occur.
4. Do not get infected when using the flat pad.
5. The flat pad can be disassembled well, which is the greatest function of selecting the flat pad.
6. Remember to ensure that the flat pad can be used normally at a relative temperature.
In order to make better use of flat mats, we should try our best to select the flat mats dipped with anti rust and anti-corrosion materials, which not only saves time and effort, but also can play a good role.